Fujitsu S300M User Manual download pdf (Page 197)

8.2 Cleaning the Inside of the ScanSnap

ScanSnap S300M Operator's Guide 177

Daily Care

• Plastic rollers (x 4)

Clean them lightly while rotating the rollers with your finger. Take care not to scratch the

surface of the rollers. Take particular care in cleaning the plastic rollers since black debris

on the rollers adversely affect the pickup performance.

Turn on the ScanSnap before cleaning the following locations, and rotate the rollers to clean

them thoroughly.

• Feed rollers (x 2)

Clean lightly taking care not to scratch the surface of the rollers. Take particular care in

cleaning the feed rollers since black debris on the rollers adversely affect the feed

performance.

• Eject rollers (x 2)

Clean lightly taking care not to scratch the surface of the rollers. Take particular care in

cleaning the eject rollers since black debris on the rollers adversely affect the feed

performance.

Open the ADF and hold down the [SCAN] button for three seconds while the power indica-

tor lights in white. This can advance the feed rollers and eject rollers by a certain degree.

You can repeat the rotation as long as the ADF is opened. (As a guideline, seven holds of

the [SCAN] button make the rollers to rotate one full turn.)

ATTENTION

Whenever cleaning the feed rollers and eject rollers, keep the Power or

USB bus power cable connected to the computer and clean the rollers

while the power indicator is lit in white.

Hold down the [SCAN] button for three

seconds.

⇒ The rollers rotate.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 226 227

No comments

Fujitsu S300M User Manual Page 197