Fujitsu S300M User Manual download pdf (Page 36)

When connecting with the power cable:

Use the power cable and USB cable .

Operation

1. Connect the power cable.

Remove the adhesive label covering the USB and power connectors.

Connect to the ScanSnap’s power connector and an outlet.

2. Connect the USB cable.

Connect the USB cable to both the ScanSnap and your computer. Insert until it is all the way

seated in the USB connector and USB port.

3. After power and USB connector are connected with cables, perform the procedure

described in "Turning the ScanSnap ON" (page. 18).

ATTENTION

• When using the USB bus power cable, your computer must have two USB

ports; one for power feeding, the other for USB cable connection.

• When connecting with the USB bus power cable via a USB hub, use a

powered hub equipped with an AC adapter.

• When the ScanSnap is connected with the USB bus power cable, the

scanning speed becomes slow.

Double-sided color documents of A4 or letter in size can be scanned at a

speed of:

- Power-cable-connected: Approx. 8 sheets/minute

- USB-bus-power-cable-connected: Approx. 4 sheets/minute

(when used with a computer with Intel

Core™ Duo 1.83 GHz and with Scan

mode set to Normal, Color mode Auto, and Compression rate 3, and others

set to defaults)

USB port

Power connector

USB connector

Computer

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 226 227

No comments

Fujitsu S300M User Manual Page 36