Fujitsu LifeBook S7220 User Manual download pdf (Page 55)

Starting Your LifeBook Notebook

Power On

Power/Suspend/Resume Button

The Power/Suspend/Resume button is used to turn on your notebook from its off state. Once you have

connected your AC adapter or charged the internal Lithium ion battery, you can power on your notebook.

To turn on your LifeBook notebook from its off state, press the Power/Suspend/Resume button, located

above the keyboard to the right. When you are done working you can either leave your notebook in sleep

mode, (see “Sleep Mode” on page 59), or you can turn it off, (see “Powering Off” on page 61).

When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal

parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit an

audio warning and/or an error message will be displayed. (See “Power On Self Test Messages” on

page 99.) Depending on the nature of the problem, you may be able to continue by starting the operating

system or by entering the BIOS setup utility and revising the settings. After satisfactory completion of the

POST, your notebook will load your operating system.

WHEN YOU TURN ON YOUR NOTEBOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS AT LEAST

ONE BATTERY IS INSTALLED AND CHARGED, OR A POWER ADAPTER IS CONNECTED AND HAS POWER.

O NOT CARRY YOUR LIFEBOOK NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS

OR VIBRATION, AS YOU RISK DAMAGING IT.

EVER TURN OFF YOUR LIFEBOOK NOTEBOOK DURING THE POWER ON SELF TEST (POST) OR IT WILL

CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK NOTEBOOK ON THE

NEXT TIME. See “Power On Self Test Messages” on page 99.

1 ... 54 55 56 ... 193

No comments

Fujitsu LifeBook S7220 User Manual Page 55