Fujitsu LifeBook S7220 User Manual download pdf (Page 86)

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,

be sure to check that your notebook has recognized the change.

Windows XP: Check the memory capacity by clicking [Start] > Settings > Control Panel > System.

Select the General tab and check the amount of memory above the [Support Information] button.

Windows Vista: Check the memory capacity by clicking [Start] -> Control Panel -> System and

Maintenance -> System. The amount of memory is displayed next to Memory - RAM. (If you are in

Classic View, access the System icon directly from the Control Panel.)

There may be a variation between the actual memory size and what is displayed. This is possible if your

system is configured with an integrated graphics media accelerator which dynamically allocates system

memory to accelerate graphics performance.

3 While holding the clips out,

remove the module from the

slot by lifting it up and pulling it

away from your notebook.

4 Store the memory upgrade

module in a static guarded

sleeve.

5 Replace the cover and reinstall

the screws.

Figure 24. Removing a Memory Upgrade Module

IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS

PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT

CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 86.

Retaining Clip

1 ... 85 86 87 ... 193

No comments

Fujitsu LifeBook S7220 User Manual Page 86