Fujitsu Lifebook T731 User Manual download pdf (Page 94)

100

101

- Memory Upgrade Module

Removing a Memory Upgrade Module

1 Perform steps 1 through 4 of Installing a Memory Upgrade Module.

2 Pull the clips sideways away from each side of the memory upgrade module at the same time.

3 While holding the clips out, remove the module by lifting it up and pulling it away from your Tablet PC.

4 Store the memory upgrade module in a static guarded sleeve.

Replace the cover and reinstall the screws.

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,

be sure to check that your Tablet PC has recognized the change.

• If you are in Control Panel Category view, check the memory capacity by clicking [Start] -> Control

Panel -> System and Security -> System -> View amount of RAM and processor speed. The

amount of memory is displayed next to “Memory - RAM:”

• If you are in one of the icon views, check the memory capacity by clicking [Start] -> Control Panel

-> System. The amount of memory is displayed next to “Memory - RAM:”

There may be a variation between the actual memory size and what is displayed. This is possible if your

system is configured with an integrated Intel Graphics Media Accelerator which dynamically allocates

system memory to accelerate graphics performance.

IF THE TOTAL MEMORY DISPLAYED IS INCORRECT, CHECK THAT YOUR MEMORY UPGRADE MODULE IS

PROPERLY INSTALLED. (IF THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT

CORRECTLY RECOGNIZED, SEE TROUBLESHOOTING ON PAGE 106.

Claw T731 UG.book Page 93 Wednesday, May 25, 2011 3:50 PM

1 ... 93 94 95 ... 418

Comments to this Manuals

No comments

Fujitsu Lifebook T731 User Manual Page 94

Comments to this Manuals

Related products and manuals for Laptops Fujitsu Lifebook T731