Fujitsu fi-5000N User Manual download pdf (Page 13)

fi-5000N Getting Started 5

3. Enter the Administrator PIN (the default setting

is "5000"), and press the [ENT] key.

4. Select "Configure Network", and press the

[ENT] (Enter) key.

The following network configuration screen appears.

5. To obtain the IP address automatically from the

DHCP (Dynamic Host Configuration Protocol)

server, select "Use DHCP" and press the [ENT]

key.

To set the IP address manually, select "Use

Static IP" and press the [ENT] key.

If "Use DHCP" is selected

: It is not necessary to

specify the IP address, subnet mask and default gate-

way. Go to step 9.

If "Use Static IP" is selected:

The following net-

work configuration screen appears.

6. Enter the IP address.

The currently configured IP address is displayed on

the entry field. To change, press the [ESC] key once

to clear the entry field. Press the [ENT] key after you

have entered the correct address.

7. Enter the subnet mask next.

The subnet mask currently configured is displayed on

the entry field. To change, press the [ESC] key once

to clear the entry field. Press the [ENT] key after you

have entered the correct value.

8. The default gateway settings screen appears

next.

The portion specified at the IP address and subnet

mask will be displayed. Enter the remaining portion

of the default gateway and press the [ENT] key.

9. Enter the DNS server addresses

(DNS1: Primary;

DNS2: Secondary)

The currently configured address is displayed on the

entry field. To change, press the [ESC] key once to

clear the entry field. Press the [ENT] key after you

have entered the correct value.

To skip this step, clear the currently displayed

address or enter "0.0.0.0" on the entry field.

If the default gateway is correct, the Speed/Duplex

(Auto Negotiation) settings screen appears.

10.Press the [K] or [L] key to select one from

among "Auto Negotiation", "100BASE-TX Full",

"100BASE-TX Half", "10BASE-TX Full" and

"10BASE-TX Half", and press the [ENT] key.

Usually "Auto Negotiation" is selected. The

following network settings confirmation screen

appears when you press the [ENT] key.

11.Confirm the contents of the settings.

To change the settings, press the [ESC] key until it

returns to the setting screen of the item to change,

and configure again.

ATTENTION

Certain DNS servers and DHCP serv-

ers, which do not support DNS

update, may cause host name resolu-

tion problems when DHCP is speci-

fied in IP address settings with

fi-5000N.

If you experience such problems, con-

sult with your network administrator

and take one of the following mea-

sures for fi-5000N and PC:

For fi-5000N,

1. Change to DNS server and

DHCP server which support DNS

update.

2. Set the IP address lease time

longer in DHCP server settings.

3. Use static IP method.

For PC,

1. Change to DNS server and

DHCP server which support DNS

update.

2. Set the IP address lease time

longer in DHCP server settings

and register the PC name on the

DNS server.

3. Use static IP method.

Do you want to

use DHCP?

Use DHCP

Use Static IP

IP Address:

Select Speed/Duplex

100BASE-TX Full

100BASE-TX Half

Auto Negotiation

IP :XXX.XXX.XXX

MASK:XXX.XXX.XXX

GW :XXX.XXX.XXX

OK:[ENT]/NG:[ESC]

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

Comments to this Manuals

No comments

Fujitsu fi-5000N User Manual Page 13

Comments to this Manuals

Related products and manuals for Hardware Fujitsu fi-5000N