System expansions
Installing and rem oving a WLAN module (optional)
WLANmod ule
You can also install a WLAN module for wireless LAN (Local Area Network)
in the bay of the folded-open drive cage.
Installing the WLAN module
► Open the casing (see "Opening the c asing", Page 29).
► Remove the drive cage (see "
Rem
oving the drive cage", Page 34).
2
2
1
► Slide the WLAN module carefully into the designated bay (1) and secure it with the two screws (2).
Make sure that you do not scratch the antenna on the front opening of the drive cage.
► Connect the USB cable to the WLAN module.
► Connect t he USB cable of the WLAN module onto the correspond ing connector
on the mainboard. Refer to the manual for the mainboard .
► Install the drive cage again (see "
Installing the drive cage", Page 35).
► Close the casing (see "
Closing t he casing", Page 30).
Details on using Wireless LAN can be found in the online help system
included with the Wireless LAN software.
A26361-K1002-Z220-1-7619, edition 2 43
Comments to this Manuals