Fujitsu C1410 User Manual download pdf (Page 55)

User Installable Features

Figure 4-14. Connecting a Parallel Device

SERIAL PORT

The serial port, or COM port, located on the system and

on the optional Port Replicator allows you to connect

serial devices, such as printers or scanners. In order to

connect a serial interface device follow these easy steps:

1. Align the connector with the port opening.

2. Push the connector into the port until it is seated.

3. Tighten the two hold-down screws, located on each

end of the connector.

DOCKING PORT

The docking port is used for the connection of your

notebook to an optional port replicator or docking

station. In order to connect your notebook to one of

these devices follow the instructions that came with your

docking port. (See figure 2-7 on page 10 for location)

UNIVERSAL SERIAL BUS PORTS

There are four USB 2.0 ports on this system (three on

the back and one on the side). The Universal Serial Bus

2.0 ports (USB) allow you to connect USB devices such

as external game pads, pointing devices, keyboards and/

or speakers.

In order to connect a USB device follow these steps:

1. Align the connector with the port opening.(Figure 4-

15)

2. Push the connector into the port until it is seated.

Figure 4-15. Connecting a USB Device

INFRARED PORT

The infrared IrDA (4Mbps) port allows for wireless data

transfer between your notebook and other IrDA-

compatible devices, such as another computer or a

printer, without the use of a cable. (See figure 2-4 on

page 7 for location)

It is important to keep in mind that while carrying out

IR communication, both devices must be placed so their

infrared ports are directly facing each other without

obstruction. The devices must be separated by at least 6"

but no more than 36" for maximum performance.

The following conditions may interfere with infrared

communications:

■

A television, radio remote control unit, or a wireless

headphone is being used nearby.

■

Direct sunlight, fluorescent light, or incandescent light

shines directly on the port.

Due to the ongoing changes in USB tech-

nology and standards, not all USB devices

and/or drivers are guaranteed to work.

■

Do not move either device while com-

munication is active as it may interrupt

data transmission.

■

Be careful not to scratch the infrared

port lens. Dirt, scratches, or other sur-

face marks can degrade operation.

clio.book Page 45 Friday, June 2, 2006 10:37 AM

1 ... 54 55 56 ... 112

Comments to this Manuals

No comments

Fujitsu C1410 User Manual Page 55

Comments to this Manuals

Related products and manuals for Laptops Fujitsu C1410